TOS Module Learning Quiz (Cord and Cable Management)

General Information

Employee Name

Date

Company Name

Quiz Questions

1. What are the key elements to check when inspecting extension cords, power cables, and hoses before use?

Fluid levels and amperage ratings. Visible damage, such as cuts or frays, and the condition of plugs, connectors, and fittings. Compatibility with nearby equipment. None of the above.

2. What should be done immediately if an extension cord, cable, or hose is found to be damaged?

Repair it with tape and continue use. Ignore it and repair it later. Tag it out but continue to use it until the replacement arrives. Remove it from service and replace it.

3. What is the best practice for routing cords, cables, and hoses in high-traffic areas?

Lay them directly across walkways to minimize the distance. Use cable covers or ramps to protect them and reduce tripping hazards. Elevate them using heavy equipment. Bundle them tightly and place them under doors.

4. Why is daisy-chaining multiple extension cords not recommended?

It reduces the power output of the cords. It makes the cords harder to organize. It can cause overheating and increase the risk of fire hazards. It is against workplace aesthetics.

5. What is the primary purpose of a Ground Fault Interrupter (GFI) device?

To regulate voltage levels. To monitor the flow of electricity and prevent electric shock by interrupting the circuit when a ground fault occurs. To provide additional outlets for electrical equipment. To extend the lifespan of electrical devices.

6. Which of the following actions should be taken to protect power cables in the workplace?

Keep them close to heaters to reduce stiffness. Ensure connections are secure and shielded from water and dirt. Lay them in direct sunlight for extended periods. Avoid periodic maintenance to save time.

7. What is the recommended method for preventing kinks and tangles in hoses?

Store hoses loosely on the floor. Fold hoses tightly after use. Secure hoses under heavy equipment. Use reels or hangers for proper storage.

8. What steps should be included in the regular inspection of swing stage power cables?

Only check connectors for secure attachment. Perform visual inspections for damage and test continuity with a multimeter. Inspect cables annually for visible damage. Test cables while the swing stage is operating.

9. What action should be taken if a swing stage power cable is found to have cuts, abrasions, or exposed wires?

Continue using the cable until a replacement is ordered. Repair the cable temporarily with tape. Tag out and immediately remove the cable from service. Use the cable only if it passes a functional test.

10. How can connection points of swing stage power cables be best protected?

Tape the connectors together tightly. Use weatherproof or protective covers for exposed connections. Place connectors in areas of high foot traffic. Position connections where stress and tugging are likely.

11. What is the best practice for routing swing stage power cables in high-traffic or hazardous areas?

Lay the cables directly across walkways without protection. Avoid securing cables to prevent stress on them. Route cables through areas where heavy machinery operates without protection. Use cable protectors or ramps in walkways and secure cables off the ground when feasible.

12. What is a recommended safety practice for preventing trip hazards related to air hoses in the workplace?

Place hoses across walkways to create a more accessible path. Store hoses neatly and securely, away from high-traffic areas. Use hoses with bright colors to increase visibility without securing them. Lay hoses loosely in areas where tools are being used.

13. When selecting an air hose for use, what factors should be considered to ensure safety and efficiency?

The hose length and color. The hose diameter, proper fittings, and resistance to abrasion, cutting, and crushing. The hose brand and the price. The hose weight and flexibility only.

14. How often should air hoses be inspected, and what should be checked during the inspection?

Inspect hoses only when they are visibly damaged. Inspect hoses once a month. Inspect hoses regularly for cuts, abrasions, bulges, or wear and tag them out if defective. Inspect hoses only when changing tools.

15. Which of the following is a correct practice when using pneumatic tools and air hoses?

Carry pneumatic tools by their hoses to make transportation easier. Use compressed air to clean debris from clothing. Always hold the air hose firmly and direct airflow away from yourself and others before connecting it to a tool. Leave air pressure on when tools are not in use to ensure immediate availability.

16. According to Saskatchewan Occupational Health and Safety Regulations, what is a requirement for an electrical extension or power supply cord before it is used?

The cord must be approved for the specific use and location where it will be used. The cord must be approved based on its color. The cord must be able to handle any voltage. The cord must only be used indoors.

17. What is the purpose of a grounding conductor (three-pronged plug) on an extension or power supply cord according to the regulations?

To ensure the cord is flexible and easy to store. To prevent the cord from getting wet. To ensure electrical safety and prevent the risk of shock. To increase the cord's durability.

18. Under Saskatchewan's Occupational Health and Safety Regulations, how should portable power cables and cable couplers be protected?

They must be protected from physical or mechanical damage, such as crushing, cutting, or abrasion. They must be shielded with tape to prevent any damage. They must be stored in secure areas away from tools. They must be used only in dry environments.

19. What responsibility do workers have concerning the management of portable power cables and cable couplers?

Workers must ensure that cables are always stored in a locked box when not in use. Workers must take reasonable steps to avoid driving equipment over or damaging cables or couplers. Workers must inspect cables and couplers after every break. Workers must only handle cables when they are not connected to equipment.

20. What action should be taken if unsafe conditions are found during the inspection of portable power cables or couplers?

The cable should be tagged and left in service until the next scheduled inspection. The cable or coupler must be repaired or taken out of service immediately. The cable can be repaired but must not be used for another month. No action is required unless the damage is visible to others.

Quiz Results

Pass/Fail

Pass Fail

Mark

/20

Reviewed with Employee

Yes No

Employee Signature

Administrator Signature